Material Handling Energy UNIT two
General Description
This power unit functions power up gravity down circuit. Activate the start solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve with the decreasing velocity controlled from the strain compensated flow management valve. Goods of this series is usually widely used in the business of logistic devices such as fork lift, mini lift table, and so on.
Unique Notes
one. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic elements concerned prior to mounting the power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which should really also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
four. Oil transforming is required soon after the original 100 operation hrs,afterwards when each and every 3000 hours.
5. The energy unit ought to be mounted horizontally.
Material Handling Electrical power UNIT 1
General Description
This energy unit is created for your fork lift business, consisting of remarkably effective gear pump, DC motor, guide increase and reduced valve, 
tank, ect. The up and down movement are managed from the lever in the guide release valve, and that is outfitted with an electrical switch to activate the motor. The lowing speed is managed from the strain compensated flow manage valve.
Special Notes
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean each of the hydraulic elements concerned prior to set up of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of impurities, N46 hydraulic oil is recommended .
4. Oil altering is needed just after the initial 100 operation hours, afterwards as soon as just about every 3000 hours.
five. The electrical power unit shown is designed to be mounted horizontally.