• Electric motor gearboxes are maintenance-free, compact power sources for driving vent, display, house and flap ventilation systems in greenhouses.
• Single phase and three phase options for your own needs.
• Key feature of these drives are a self-braking worm gear transmission and a built-in linear limit switch device.
shaft-installed gear motors are complete electromechanical drives where the speed of the installed electric motor is decreased to the required value using two to four reduction stages. The drives are powerful and durable and feature a compact and lightweight design.
The compact design is made possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight reduction compared to commercially available drive motors. This is achieved through the constant application of aluminum die casting technology, which ensures a high amount of rigidity for the apparatus and motor housing simultaneously.
Each drive is produced and tested specifically for every order and customer. A sophisticated modular system allows for an excellent diversity of types and a optimum amount of customization to client requirements.
Thanks to their integrated control units, the shaft-mounted gear motors are the ideal drives for applications in reversing mode. In both rotation directions, described end positions are shielded by two placement limit switches. This uncomplicated remedy does not just simplify the cabling, but also can help you configure the finish positions quickly and easily. The high shut-off accuracy of the limit switches ensures safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It really is connected with a steel shaft to turn the pinions for greenhouse ventilation. With the support of electric panel, it can run and then stop after set amount of turns. Then it can open and close the windows for greenhouse ventilation to right positions.
To keep the delicate environment in the greenhouse, climate control systems certainly are a necessity. Many mechanical systems can be used in this respect; however glass vent drive systems have a tendency to be the most famous. The drive system includes a central gearmotor connected to a 40:1 right angle reducer with dual result shafts. These OP shafts connect to long jack shafts that spread over the roof line of the greenhouse linking to multiple rack and pinion mechanisms that open up and close large cup screen panes in the ceiling for temperature control.
With respect to the size of the application (amount of the shafting, amount and weight of the screen panes) we offers two gearmotor solutions from a modified edition of their 200 series parallel shaft collection – 1/5 HP and 1/20 HP. The application form Is generally intermittent in use; nevertheless the motors are ranked continuous because the glass pane home windows could potentially be under constant, subtle adjustment throughout the day.
Gear Motor, also called Engine Gearboxes, is a specific type of electrical motor that is designed to generate high torque whilst maintaining a minimal horsepower, or low velocity, motor output. Gear motors can be found in many different applications, especially for the greenhouse, livestock and agricultural sector, our motors are available options to use roof vents, wall structure vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment errors and can be quickly removed without disturbing the entire shaft.
shaft-installed gear motors are finish electromechanical drives in which the speed of the installed electrical motor is reduced to the required value using two to four reduction stages. The drives are powerful and durable and show a compact and lightweight design.
Rise to this day with recent information about greenhouse gear motor at our useful site.