Our worm gear reducers offer a choice of a solid or hollow result shaft and show an adjustable mounting placement. Both SW-1 and the SW-5, however, can withstand shock loading much better than other decrease gearbox styles, making them ideal for demanding applications.
Tough compression-molded glass-fill up polyester housing
Light-weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Sturdy or Hollow output shaft
Adjustable mounting position
Worm Gear Rate Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s velocity reducer product line – has been serving industry reliably for over 40 years. Its tested modular design has set the market standard for performance and may be the most imitated product in today’s worm gear velocity reducer market. But why accept a knock-off when you can have the initial – from EP Gear.
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for much longer operating life.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure great, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, in addition to greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of substantial torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Right angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) happen to be an ideal meet for motors with high input speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales personnel for help determining which gearbox answer is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers are designed with a hollow bore and allow for a corner convert with optional dual output. The reducers come in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes were created with five mounting choices providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
The right angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a good and efficient right angle configuration, our right angle planetary gearboxes provide a robust solution. The proper angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series small planetary gearbox configurations provide the smallest footprint and quietest procedure of our rate reducers. These gearboxes are made to deal with varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we have a solution to fit your needs. Our 52 frame size can be available with plastic material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations supply the highest efficiency and best output torque of most our velocity reducers. These gearboxes are made to handle varying loads with little backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we’ve a solution to suit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes are the top decision for continuous duty applications. Their equipment cluster design provides a highly effective method for dissipating warmth. Parallel shaft gearboxes possess the shortest length of our inline equipment reducer options so they work very well in environments with limited space. Our parallel shaft gear reducers provide an affordable drop-in substitute solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, speed reducers, worm equipment reducers and worm travel gearboxes. Gear decrease boxes include a gear arrangement when a gear in the type of a screw, also referred to as a worm, meshes with a worm gear. These gears are usually created from bronze and the worms happen to be metal or stainless steel.
While worm gears act like a spur equipment, the worm gearboxes are significantly smaller than other equipment reduction boxes. A main benefit of worm gear reducers can be that they generate an output that is 90° from the insight and can be utilized to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox provides right hands threads; to change the path of the output, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
If you need even more information concerning worm reduction gearbox take a look at our site.