Our worm gear reducers offer an option of a solid or hollow output shaft and show an adjustable mounting placement. Both the SW-1 and the SW-5, however, can withstand shock loading much better than other decrease gearbox designs, making them ideal for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Velocity Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s speed reducer products – has been serving industry reliably for over 40 years. Its verified modular style has set the market standard for efficiency and may be the most imitated item in today’s worm gear speed reducer marketplace. But why settle for a knock-off when you’re able to have the initial – from EP Gear.
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility permits installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, as well as greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Right angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high input speeds, or when gearmotor efficiency is important. Contact our technical sales staff for help identifying which gearbox alternative is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers are designed with a hollow bore and invite for a corner convert with optional dual result. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
The right angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a solid and efficient right angle configuration, our correct angle planetary gearboxes offer a robust solution. The right angle bevel gearbox comes in 18 ratios which range from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series small planetary gearbox configurations provide the smallest footprint and quietest operation of our quickness reducers. These gearboxes are made to handle varying loads with small backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to fit your needs. Our 52 frame size is also available with plastic gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations provide the highest efficiency and best output torque of most our quickness reducers. These gearboxes are made to manage varying loads with small backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio choices ranging from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes are the top choice for continuous duty applications. Their gear cluster design provides an effective method for dissipating warmth. Parallel shaft gearboxes possess the shortest length of our inline equipment reducer options therefore they work very well in conditions with limited space. Our parallel shaft gear reducers provide an affordable drop-in alternative solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, quickness reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement when a equipment in the form of a screw, also referred to as a worm, meshes with a worm gear. These gears are typically made from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other gear reduction boxes. A principal benefit of worm gear reducers is that they produce an output that is 90° from the input and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox provides right hand threads; to improve the path of the output, a left-hands thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
Discover every little thing you have actually ever before wanted to recognize about Worm Reduction Gearbox.